基于组件特征模型的产品布局设计

本文将产品的布在布局设计过程视为一个组件特征的 布局演化过程，提出了基于组件特征模型的产品布局设计方法，并进行了实例验证。     

湿敏半导体材料电导率计算方法的研究

结合修正了的耗尽层理论和多孔湿敏半导体的特点，本文提出了一个简单的物理模型作为ｎ型湿敏半导体特征的一级近似。描述了多孔湿敏半导体的导电机理，并给出了湿度与宏观电导率的关系。     

基于DOS的多窗口系统的设计与实现

窗口系统是人机交互的基本环境，与目前ＤＯＳ上的窗口系统相比，本文力求突出高效，低开销，具有多任务模拟能力，满足可移植性，实用性和开放性目标，本文首先提出一个基于ＤＯＳ的多窗口系统ＷＩＮＤ的总体设计，采用面向对象技术，讨论了其多窗口管理机制的特征和方法，并设计和实现了该系统相关的基本工具，最后通过编程环境、界面风格和应用实例等进一步介绍该窗口系统的应用接口。     

SMS——智能网的业务管理系统

本文叙述了智能网的业务管理系统所实现的３种功能：业务管理功能，网络管理功能和业务管理访问功能，还介绍了业务管理和网络管理之间的关系，ＳＭＳ的集中式和分布式两种体系结构及业务管理功能的设计方法和进一步研究方向。     

Mashing of rice with barley malt under non-conventional process conditions for use in food processes

Non-conventional mashing conditions are relevant in the development of a lactic acid-fermented soymilk beverage where mashed rice is the source of carbohydrates for the fermentation and sweetness of the beverage. Advantages in the process layout could be achieved by mashing at higher pH and lower malt concentrations than normally used in the brewing industry. the work reported here assessed the consequences of mashing under non-conventional conditions. Malt concentration in the cereal part was varied from 25% to 70% (w/w), pH was varied within 5.3 to 7.1, and prolongation of the holding times at 50°C and 62°C was investigated. Regression equations have been established for predicting yields of soluble protein, low molecular weight sugars and total fermentability as functions of pH and malt concentration. the results showed that the maltose yield was constant while glucose, maltotriose and total fermentable sugar yields decreased slightly with increasing pH and decreasing malt concentration. Prolonged mash holding times at 50°C and 62°C gave minor increases in protein yields only. It is concluded that it is quite acceptable to use non-conventional mashing conditions when a mashing step is integrated in other food processes.     

TiN/NbN纳米多层薄膜的交变应力场和超硬效应

为了研究纳米多层薄膜的超硬效应 ,采用反应溅射法制备从 1 4nm至 2 7nm不同调制周期的一系列TiN/NbN纳米多层膜。高分辨电子显微镜对薄膜的调制结构和界面生长方式的观察发现 ,TiN/NbN膜具有很好的调制结构 ,并呈现以面心立方晶体结构穿过调制界面外延生长的多晶超晶格结构特征。显微硬度测量表明 ,TiN/NbN纳米多层膜存在随调制周期变化的超硬效应。薄膜在调制周期为 8 3nm时达到HK39 0GPa的最高硬度。分析认为 ,两种不同晶格常数的晶体外延生长形成的交变应力场 ,对材料有强化作用 ,这是TiN/NbN纳米多层膜产生超硬效应的主要原因     

察尔汗盐湖镁资源的开发及展望

察尔汗盐湖不仅具有丰富的镁资源，而且具有开发盐湖的能源，政策优势，由脱水氯化镁可制得多种镁产品。氯化镁脱水技术，氯化镁制金属镁技术是综合开发盐湖水镁资源的关键技术，将纳米技术应用于盐湖镁资源的开发，使镁产品高值化，精细化，将是察尔汗盐湖镁资源的开发方向。     

REHEATING TEMPERATURE CONTRAST AND MICROSTRUCTURES OF 7075 Al ALLOY CAST BY LIQUIDUS SEMI-CONTINUOUS CASTING

In this study, reheating of liquidus semi-continuous cast billets of 7075 Al alloy was carried out in a resistance furnace, and the temperature contrast of the outer and the center of the reheated billets was investigated, then the reheating microstructures were investigated. Results show that: the difference of temperature between the outer and center is small and the difference of their microstructures are also small. During reheating at 576℃ the spheroidization of grains is significant after 5min and no rosettes are visible after 20min by optical microscopy. Similar observations were madeon materials reheated at 596℃, but the ripening process is faster. The grains growup to 30-60μm, fine enough for thixoforming.     

注塑成形模拟技术在模具设计中的应用

在一模多腔的注塑模具设计中,合理地设计分流道和浇口的尺寸,保证塑料熔体以相同的成形压力和温度,在同一时间充满型腔一直是设计的重点和难点。以非自然平衡浇注系统为重点,阐述了浇道和冷却系统的优化算法以及如何利用华塑三维模拟成形分析软件进行流动模拟和工艺优化。     

液相流动对柱晶一次间距的影响

利用带有对流驱动系统的定向凝固装置,研究了液相稳定流动时透明合金SCN-2wt-％Ace定向凝固的动态过程.结果表明:流动显著改变定向凝固柱状晶的一次间距枝晶的间距增大,主要是流动与枝端浓度场耦合作用的结果;胞晶的间距变小,主要是侧向分枝转向生长的结果